2019 CAT D5K2XL DOZER

2019 CAT D5K2XL DOZER WITH 2000HRS. UNIT IS EQUIPPED WITH A TIER 4 FINAL ENGINE, PAT BLADE, MS RIPPER, CAB KIT(CAN CONVERT TO ENCLOSED CAB), HEATER(PLUMBED FOR AC), PRE-WIRED FOR TRIMBLE/GRADE CONTROL. UNIT HAS BEEN CAT-MAINTAINED SINCE NEW. VERY NICE, TIGHT DOZER. GREAT PRICE; WILL NOT LAST.

Caterpillar D5K2 XL Track-Type Tractor Specifications

Engine
Specification	Value	Notes
Engine Model	Cat C4.4 ACERT	Tier 4 Final / Stage IV / Japan 2014 certified
Rated Net Power @ 2,200 rpm	77.6 kW / 104 hp	SAE J1349
Rated Net Power @ 2,200 rpm	77.6 kW / 104 hp	ISO 9249 / EEC 80/1269
Bore	105 mm / 4.13 in
Stroke	127 mm / 5 in
Displacement	4.4 L / 269 in³
Weights
Operating Weight – XL	9,214 kg / 20,313 lb	Equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank
Operating Weight – LGP	9,522 kg / 20,992 lb
Operating Weight – LGP, 762 mm / 30 in shoes	9,726 kg / 21,442 lb
Transmission and Travel
Drive Pumps	1
Track Motors	2
Relief Valve Settings	48,500 kPa / 7,033 psi
Maximum Travel Speed – Forward	9 km/h / 5.6 mph
Maximum Travel Speed – Reverse	10 km/h / 6.2 mph
Transmission Type	Dual path, closed-loop hydrostatic transmission	Standard equipment
Undercarriage
Number of Rollers – Each Side	7
SALT Undercarriage Shoes – Each Side	40	Sealed and lubricated track
SystemOne Undercarriage Shoes – Each Side	36
Shoe Width – XL	510 mm / 20 in
Shoe Width – LGP	660 mm / 26 in
Shoe Width – LGP, 762 mm / 30 in	762 mm / 30 in
Length of Track on Ground	2,310 mm / 91 in	XL, LGP and 30 in LGP
Track Gauge – XL	1,600 mm / 63 in
Track Gauge – LGP	1,750 mm / 69 in
Track Gauge – LGP, 762 mm / 30 in	1,860 mm / 73.2 in
Ground Contact Area – XL	23,562 cm² / 3,652 in²
Ground Contact Area – LGP	30,492 cm² / 4,726 in²
Ground Contact Area – LGP, 762 mm / 30 in	35,574 cm² / 5,514 in²
Ground Pressure – XL	38.6 kPa / 5.6 psi
Ground Pressure – LGP	31.1 kPa / 4.5 psi
Ground Pressure – LGP, 762 mm / 30 in	27.1 kPa / 3.93 psi
Service Refill Capacities
Fuel Tank	195 L / 51.5 gal
Crankcase and Filter	11 L / 2.91 gal
Final Drives – XL, Each Side	10 L / 2.6 gal
Final Drives – LGP, Each Side	10 L / 2.6 gal
Cooling System	22.4 L / 5.92 gal
Transmission / Hydraulic Tank	59.5 L / 15.7 gal
Diesel Exhaust Fluid Tank	19 L / 4.9 gal
Hydraulic Controls
Pump Output	68.0 L/min / 17.7 gal/min
Relief Valve Settings	20,600 kPa / 2,988 psi
Standard Hydraulics	3 valve, load sensing hydraulics
Optional Hydraulics	4 valve for ripper or winch
Ripper
Type	Parallelogram
Number of Shanks	3
Maximum Digging Depth	337.5 mm / 13.3 in
Maximum Reach at Ground Line	555 mm / 21.9 in
Maximum Ground Clearance Under Tip	448 mm / 17.6 in
Overall Width	1,710 mm / 67.3 in
Height	165 mm / 6.5 in
Weight	554 kg / 1,222 lb
Winch
Weight	610 kg / 1,345 lb
Winch Drive	Hydrostatic
Control	Hydraulic
Speed	Variable
Winch Length	705 mm / 27.76 in
Overall Width	741 mm / 29.2 in
Drum Diameter	254 mm / 10 in
Drum Width	274 mm / 10.8 in
Throat Clearance	171.5 mm / 6.75 in
Recommended Rope Diameter	16 mm / 0.63 in
Optional Rope Diameter	19 mm / 0.75 in
Drum Capacity – Recommended Cable	113 m / 371 ft
Drum Capacity – Optional Cable	78 m / 256 ft
Maximum Line Pull – Bare Drum	18,144 kg / 40,000 lb
Maximum Line Pull – Full Drum	11,340 kg / 25,000 lb
Maximum Line Speed – Bare Drum	40 m/min / 131 ft/min
Maximum Line Speed – Full Drum	63 m/min / 207 ft/min
XL Dimensions and VPAT Blade
Track Gauge	1,600 mm / 63 in
Width of Tractor – Standard Shoes, No Blade	2,110 mm / 83.1 in
Overall Length with Blade	4,309 mm / 170.1 in
Length of Basic Tractor without Blade	3,265 mm / 128.5 in
Tractor Height	2,769 mm / 109 in
Ground Clearance	332 mm / 13 in
Blade Width	2,782 mm / 109.5 in
Blade Height	1,073 mm / 42.2 in
Blade Lift Height	767 mm / 30.2 in
Digging Depth	586 mm / 23.1 in
Blade Cutting Edge Angle	52° to 58°	Adjustable
Maximum Tilt	402 mm / 15.8 in
Maximum Angle	25° either side
Blade Width at Maximum Angle	2,636 mm / 103.8 in
Blade Capacity	2.19 m³ / 2.86 yd³	SAE
Cab and Standards
Sound Level	77 dB(A)	ISO 6396:2008
Sound Level	78 dB(A)	SAE J1166 FEB2008
ROPS	SAE J397-OCT95, SAE J1040-May94, ISO 3471-94, ISO 3164:2008
FOPS	SAE J231-JAN81, ISO 3449:2005 Level III
Selected Optional Equipment
Cab Options	Cab with air conditioning; polycarbonate windows and air conditioning
Seat Options	Heated seat, heated controls, heated and ventilated seat options
Radio	AM/FM, Bluetooth
Sound Suppression	Available
SystemOne Track Options	510 mm XL, 660 mm LGP and 762 mm LGP
Blades	VPAT XL, VPAT LGP and VPAT Intermediate
Rear Attachments	Drawbar, winch mounting, parallelogram ripper with three shanks and teeth
Machine Control	AccuGrade ready with Cat Grade Control Slope Assist; Power Pitch blade control

Features and Benefits

Grade Control and Productivity

Slope Indicate displays blade cross slope and mainfall without requiring the operator to estimate.
Optional Slope Assist helps automatically maintain desired blade mainfall and cross slope.
Stable Blade helps achieve finish grade with less operator effort.
Optional AccuGrade system supports more accurate cut-and-fill work while reducing the need for stakes and grade checkers.

Power and Efficiency

Cat C4.4 ACERT diesel engine meets Tier 4 Final / Stage IV / Japan 2014 emissions standards.
Eco Mode throttle settings can reduce fuel consumption up to 20%.
Automatic Traction Control helps reduce track slip without needing to lift the blade.
Dual path, closed-loop hydrostatic transmission provides responsive control.

Operator Comfort

Seat-mounted controls with fore/aft adjustment and adjustable armrests.
Optional heated and ventilated air-suspension seat and heated joystick controls.
Electronic Monitoring System includes gauges, travel speed limiter, engine rpm and gear display, hour meter and service indicators.
Optional cab with air conditioning, sound suppression and Bluetooth radio.

Undercarriage and Blade Options

Choice of standard SALT or SystemOne undercarriage configurations.
XL and LGP undercarriage options support different ground-pressure and flotation needs.
VPAT blade options include XL, LGP and Intermediate blades.
Optional Power Pitch blade control lets the operator adjust blade pitch from the cab.

Serviceability and Attachments

Ecology drains and scheduled oil sampling ports support routine maintenance.
Optional parallelogram ripper includes three shanks and teeth.
Hydrostatic winch option offers variable speed and high line pull capability.
Cat Product Link PL631 Satellite / PL641 Cellular listed as standard equipment.

Specifications are based on Caterpillar publication AEHQ7400, dated January 2015. Equipment specifications and available options may vary by machine configuration.