2012 CAT 950K Wheel Loader(sold)

WARRANTY UNTIL 2015, ONE OWNER, TIER 4, FORKS AND 4.25 YD BUCKET INCLUDED, QUICK COUPLER, RIDE CONTROL, BACKUP CAMERA, JUST SERVICED AT PETERSON CAT, LIKE NEW, INSPECTIONS WELCOME!

LOCATION: SAN LEANDRO, CA 94577
PRICE: $219,000
HOURS: 1800

CAT 950K Specs

Bucket
Reference: Bucket capacity (cu yds): 4.0
Reference: Bucket edge: Bolt-on
Bucket capacities, min-max (cu yds): 3.25 – 12.0
Bucket widths, min-max (in): 115″ – 117″
Weight
Operating weight (lbs): 44,137
Drivetrain
Transmission type*: Auto/PS
Number of speeds, fwd/rev: 4 / 4
Max travel speed, fwd/rev (mph): 23.6 / 24.7
Tires
Reference tire size: 23.5R25
Engine
Net engine power (hp): 211
Engine make: Cat
Engine model: C7.1 ACERT
Performance
Breakout force (lbs): 34,391
Static tip load, straight (lbs): 24,899
Static tip load, full turn (lbs): 21,293
Dump clearance, full height @ discharge (ft/in): 10′ 10″
Dump reach, full height @ discharge (in): 59″
Bucket hinge pin height (in): 178″
Bucket linkage type*: Z
Total cycle time: Raise, dump & lower (sec): 10
Dimensions
Length w/bucket on ground (ft/in): 28′ 10″
Width over tires (ft/in): 8′ 11″
Height to top of cab (ft/in): 11′ 0″
Wheelbase (ft/in): 10′ 11″
Ground clearance (in): 15″
Turn angle, either side (deg): 40°
Turning radius, bucket carry (ft/in): 23′ 3″