2011 DEERE 550J LT DOZER-(SOLD)

2011 DEERE 550J LT WITH ONLY 2500HRS! UNIT IS EQUIPPED WITH PAT BLADE, MS RIPPER, CAB W/ HEAT/AC, JOYSTICK CONTROLS, TIER 3 DEERE ENGINE, 70% UC, UNIT IS READY TO GO TO WORK.

Dimensions
A. LENGTH W/ BLADE 13.3 ft in 4040 mm
B. WIDTH OVER TRACKS 6.6 ft in 2006 mm
C. HEIGHT TO TOP OF CAB 9 ft in 2743 mm
D. LENGTH OF TRACK ON GROUND 7.2 ft in 2184 mm
E. GROUND CLEARANCE 1.1 ft in 345 mm
Undercarriage
G. TRACK GAUGE 5.1 ft in 1550 mm
H. STANDARD SHOE SIZE 18 in 457 mm
Specification
Engine
MAKE John Deere
MODEL 4045T
NET POWER 80 hp 60 kw
POWER MEASURED @ 2200 rpm
MAX TORQUE 263 lb ft 358 Nm
DISPLACEMENT 276 cu in 4.5 L
TORQUE MEASURED @ 1200 rpm
ASPIRATION Altitude-compensating turbocharger
NUMBER OF CYLINDERS 4
Operational
OPERATING WEIGHT 17013.1 lb 7717 kg
FUEL CAPACITY 47 gal 178 L
COOLING SYSTEM FLUID CAPACITY 4.2 gal 16 L
ENGINE OIL CAPACITY 3.7 gal 14 L
HYDRAULIC FLUID CAPACITY 8.5 gal 32.2 L
POWERTRAIN FLUID CAPACITY 11.3 gal 42.7 L
FINAL DRIVES FLUID CAPACITY 1.7 gal 6.6 L
OPERATING VOLTAGE 12 V
ALTERNATOR SUPPLIED AMPERAGE 65 amps
Transmission
TYPE Hydrostatic
MAX SPEED – FORWARD 5 mph 8 km/h
MAX SPEED – REVERSE 5 mph 8 km/h
Undercarriage
GROUND PRESSURE 5.5 psi 37.9 kPa
GROUND CONTACT AREA 3096 in2 2 m2
STANDARD SHOE SIZE 18 in 457 mm
NUMBER OF SHOES PER SIDE 40
NUMBER OF TRACK ROLLERS PER SIDE 6
TRACK PITCH 6.3 in 160 mm
TRACK GAUGE 5.1 ft in 1550 mm
Hydraulic System
PUMP TYPE Gear
RELIEF VALVE PRESSURE 3000 psi 20684.3 kPa
PUMP FLOW CAPACITY 15 gal/min 56.8 L/min
Standard Blade
WIDTH 8.8 ft in 2667 mm
HEIGHT 32.5 in 826 mm
CAPACITY 2.1 yd3 1.6 m3
BLADE ANGLE (BOTH DIRECTIONS) 22.2 degrees
CUTTING DEPTH 21 in 523 mm
Dimensions
LENGTH W/ BLADE 13.3 ft in 4040 mm
WIDTH OVER TRACKS 6.6 ft in 2006 mm
HEIGHT TO TOP OF CAB 9 ft in 2743 mm
LENGTH OF TRACK ON GROUND 7.2 ft in 2184 mm
GROUND CLEARANCE 1.1 ft in 345 mm