2011 CAT PM102 COLD PLANER

2011 Cat PM102 40″ Cold Planer with 2000hrs. The unit has been owner-operated most of its life. Designed primarily for road milling and pavement repair, it features a 40-inch (1,000 mm) cutting width and a maximum cutting depth of 12 inches (305 mm). The unit has some missing track pads and a minor hydraulic leak in the steering cylinder. Tier 3 no emissions!

Caterpillar PM102 Cold Planer Specifications

Operating Dimensions and Weights
Specification	Value	Notes
Operating Weight – Track Undercarriage	17,600 kg / 38,810 lb	Approximate; includes coolant, lubricants, full fuel, full water and 75 kg (165 lb) operator
Operating Weight – Wheel Undercarriage	17,100 kg / 37,705 lb	Approximate; includes coolant, lubricants, full fuel, full water and 75 kg (165 lb) operator
Overall Length	10.7 m / 35 ft 1 in
Maximum Width – Track	2.5 m / 8 ft 2 in
Maximum Width – Wheel	2.4 m / 7 ft 9 in
Width with Right Rear Leg Tucked – Track	1.98 m / 6 ft 5 in
Width with Right Rear Leg Tucked – Wheel	2.0 m / 6 ft 6 in
Maximum Height with Canopy	3.4 m / 11 ft 2 in
Inside Turning Radius – Track	3.45 m / 11 ft 3 in
Inside Turning Radius – Wheel	3.45 m / 11 ft 3 in
Cutting System
Cutting Width	1,000 mm / 40 in
Maximum Cutting Depth	305 mm / 12 in
Conveyor Swing	41° left or right of center
Tool Holder	Exclusive quick-release conical tool holder
Rotor Protection	Automatic disengagement at low rotor rpm	Helps reduce drive-system damage
Engine and Performance
Engine	Cat C7 with ACERT Technology
Rated Power	168 kW / 225 hp
Operating Speed – Track	27 m/min / 89 ft/min
Operating Speed – Wheel	46 m/min / 151 ft/min
Travel Speed – Track	4.1 km/h / 2.5 mph
Travel Speed – Wheel	6.4 km/h / 3.9 mph
Shipping Dimensions and Weights
Shipping Weight – Track	17,100 kg / 37,705 lb	Approximate; 50% fuel and empty water tank
Shipping Weight – Wheel	16,400 kg / 36,160 lb	Approximate; 50% fuel and empty water tank
Shipping Length with Conveyor Folded	8.5 m / 27 ft 8 in
Shipping Height with Canopy Folded	3.1 m / 10 ft 1 in
Capacities
Fuel Tank	400 L / 105 gal
Water Spray System	1,060 L / 280 gal
Undercarriage and Mobility
Available Undercarriage	Track or wheel
Flush Cutting	Wheel-undercarriage configuration
Rear Camera	Optional

Features and Benefits

Compact Size and High Mobility

Compact dimensions help the PM102 work in tight urban and commercial paving areas.
Available with track or wheel undercarriage configurations.
Strong maneuverability and travel speed allow quick repositioning.
The wheel-undercarriage configuration supports flush-cutting applications.

Cutting Performance

Engine and hydraulic weight is positioned over the rotor to improve traction and cutting consistency.
40-inch cutting width and up to 12-inch cutting depth.
Conveyor swings 41 degrees left or right of center.
Quick-release conical tool holders simplify tool changes and promote proper tool rotation.

Rotor Drive Protection

Rotor drive automatically disengages when low rotor rpm is detected.
This helps reduce drive-system damage if the rotor contacts an immovable object.
The rotor drive belt is designed for straightforward replacement.

Operator Visibility and Control

Controls are positioned within easy reach for simple operation.
The machine can support one-person operation where conditions and regulations permit.
Excellent visibility helps improve precision, control and crew safety.
Optional rear camera provides additional visibility.

Cat Dealer Support

Worldwide Cat dealer network and factory-trained paving-equipment technicians.
Parts, service, financing and rental support through participating Cat dealers.
New and Cat Reman replacement parts availability.

Specifications are based on Caterpillar publication QEXQ1514, dated January 2011. Published operating and shipping weights are approximate, and specifications or options may vary by machine configuration.